Hardware

Kluson Tuners (1956-1964) Single Line [aged]

Kluson Tuners (1956-1964) Single Line [aged]

$66.00

Aged Kluson Tuners for Fender.  6 individual in line, nickel, single line (1956-1964), split post (safety post) vintage style tuning machine. Kluson model #SD9105MN. Includes 6 tuners, 6 bushings, and 7 mounting screws. Great replacement tuners for your vintage or Custom Shop Stratocaster, Telecaster, Jaguar, Jazzmaster; just like the originals but with improved 15:1 tuning ratio.

Bushing dimensions: 8.8mm (outside), 1/4" (inside). Other dimensions: total center to center distance of all 3 posts - 2 3/4", center to center distance between posts - 1 3/8", length of baseplate- 4 1/4", post height - 1", drilled post, single hole, post dia. 6.3 mm (1/4").

Historically used on: 1956-1964 Fender Telecaster, 1956-1964 Fender Stratocaster, 1958-1964 Fender Jazzmaster, 1959-1964 Fender Custom Telecaster, 1962-1964 Fender Fender Bass IV (6 string bass), 1962-1964 Fender Jaguar.

Quantity

Price: $66.00

Humbucker Polepiece Screws [new]

Humbucker Polepiece Screws [new]

$10.00

New nickel humbucker polepiece fillister head screws for Gibson PAF style pickups. Full set of 12 (twelve) for a pair of pickups. Size: 5-40 thread x 3/4" (will fit Gibson humbuckers and most vintage style humbucker pickups like Throbak, Fralin, Sheptone, Wolfetone, Lollar, Bare Knuckles, Duncan, etc.).

Quantity

Price: $10.00

Loading Updating cart...
Historic ABR-1 Bridge [new]

Historic ABR-1 Bridge [new]

$89.00

Gibson Historic Spec ABR-1 Wireless Bridge. Nickel. Gibson P.N. PBBR-065. New (sealed in manufacturer's packaging).

Replicates the original down to every last detail! Straight from Gibson Guitar's Historic Re-issue guitars come Gibson's new Historic Spec series—parts that have been specially designed to replicate the original parts used by Gibson in the late 1950s.

With this Historic Non-Wire ABR-1 Bridge, Gibson has re-created the famous non-wire bridge it used on its electric guitars until 1962-63. 'GIBSON ABR-1' is featured in raised letters on the base of the bridge. The vintage bridge also includes un-notched saddles, in order to fully emulate the classic parts. The Non-Wire ABR-1 Bridge comes with the full assembly.

Quantity

Price: $89.00

Loading Updating cart...
Pickguard Bracket (nickel) [new]

Pickguard Bracket (nickel) [new]

$12.00

Gibson Pickguard Bracket (nickel). Gibson P.N. PRPB-030. New (sealed in manufacturer's packaging).

A replacement bracket made by Gibson and designed to hold an original Les Paul pickguard in place, including installation screws.

Quantity

Price: $12.00

Strap Buttons (2) Gibson [new]

Strap Buttons (2) Gibson [new]

$14.00

Gibson Strap Buttons (2).

This set of Gibson Accessories Strap Buttons includes two aluminum strap buttons with mounting screws.

Quantity

Price: $14.00

Loading Updating cart...
Knurled Deep Nut Nickel [new]

Knurled Deep Nut Nickel [new]

$9.00

Knurled Deep Nut for Switchcraft USA toggle switch, vintage Gibson style. Nickel. Outer dimension 5/8", inside dimension 7/16", collar 1/8", 15/32-32 thread.

Quantity

Price: $9.00

Loading Updating cart...
Flat top Knobs (’60s) for Fender Tele Pbass [new]

Flat top Knobs (’60s) for Fender Tele Pbass [new]

$18.00

Flat tops (1960s style) knobs  for Fender Telecaster, PBass, Esquire. Fit 1/4" solid shaft pots.  0.75" tall, 0.75" diameter. New.

Quantity

Price: $18.00

Loading Updating cart...
Flat top Knobs (’60s) for Fender Tele Pbass [aged]

Flat top Knobs (’60s) for Fender Tele Pbass [aged]

$22.00

Aged flat tops (1960s style) knobs  for Fender Telecaster, PBass, Esquire. Fit 1/4" solid shaft pots.  0.75" tall, 0.75" diameter.

Quantity

Price: $22.00

Loading Updating cart...
Domed Knobs (’50s) for Fender Tele Nocaster [new]

Domed Knobs (’50s) for Fender Tele Nocaster [new]

$19.00

Domed (1950s style) knobs for Fender Telecaster, Nocaster, Broadcaster, Esquire. Fit 1/4" solid shaft pots.  0.73" tall, 0.75" diameter. New. Fender P.N. 099-2056-000.

Quantity

Price: $19.00

Humbucker Covers (pair) Nickel [aged]

Humbucker Covers (pair) Nickel [aged]

$45.00

Humbucker covers for vintage Gibson PAF style pickups. Nickel (pair). Aged.

Polepice spacing is vintage spec 1-15/16" (49.2 mm). Will fit Gibson humbuckers and most vintage style humbucker pickups like Seymour Duncan, Throbak, Sheptone, Fralin, Wolfetone, Bare Knuckles, Wizz, Lollar, Lust for Tone, etc. Shown on a real 1950s Patent Applied For pickup for demonstration only.

NOTE: these are a custom order. Select your preferred level of aging and we will send you a picture of your covers before shipping.

Quantity

Price: $45.00

Loading Updating cart...
Gibson Historic ABR-1 Bridge [aged]

Gibson Historic ABR-1 Bridge [aged]

$85.00

Vintage Relic aged Gibson Historic Spec Non-wire Tune-O-Matic ABR-1 nickel bridge for Gibson Les Paul 335 SG Standard Historic Custom Shop 1959 1958 1960 Burst. Model PBBR-059. Includes bridge, thumbwheels, posts and original packaging. These are brand new, recently aged distressed relic'd by us for a 1950s 1960s vintage look.

Pictures show a "medium" relic; you may select "light" or "heavy."

Replicates the original down to every last detail! Straight from Gibson Guitar's Historic Re-issue guitars come Gibson's new Historic Spec series—parts that have been specially designed to replicate the original parts used by Gibson in the late 1950s. With this Historic Non-Wire ABR-1 Bridge, Gibson has re-created the famous non-wire bridge it used on its electric guitars until 1962-63. 'GIBSON ABR-1' is featured in raised letters on the base of the bridge. The vintage bridge also includes un-notched saddles, in order to fully emulate the classic parts. The Non-Wire ABR-1 Bridge comes with the full assembly.

Quantity

Price: $85.00

Loading Updating cart...
Lightweight Tailpiece for Gibson [aged]

Lightweight Tailpiece for Gibson [aged]

$55.00

Vintage Relic aged stop TAILPIECE. Lightweight (only 1.2 oz) aluminum, nickel plated for Gibson Les Paul 335 SG Standard Historic Custom Shop 1959 1958 1960 Burst. These are brand new, recently aged distressed relic'd by us for a 1950s 1960s vintage look. Vintage / historic spec (will fit vintage and USA made Gibson guitars). Made in USA.

Pictures show a "medium" relic; you may select "light" or "heavy."

Quantity

Price: $55.00

Loading Updating cart...
Tailpiece Studs / Bushings for Gibson [aged]

Tailpiece Studs / Bushings for Gibson [aged]

$20.00

Vintage Relic aged tailpiece STUDS & BUSHINGS, brass, nickel plated for Gibson Les Paul 335 SG Standard Historic Custom Shop 1959 1958 1960 Burst. These are brand new, recently aged distressed relic'd by us for a 1950s 1960s vintage look.

Vintage / historic spec (will fit vintage and USA Historic Spec tailpieces with ears measuring 5/16" or less). Bushing dimensions: .875" x .50". Made in USA.

Pictures show a "medium" relic; if you may select "light" or "heavy."

Quantity

Price: $20.00

Bigsby B5 USA Tailpiece [aged]

Bigsby B5 USA Tailpiece [aged]

$149.00

Aged RELIC Bigsby B5 USA aluminum/nickel vibrato tailpiece. New, recentlyaged for a 1950s 1960s 1970s vintage look. Perfect for your Gibson SG Les Paul Special vintage or Historic Custom Shop or Fender Telecaster. Includes all mounting hardware, instructions, original box.

Photos show typical "medium" relic; you may select "light" or "heavy" below.

Designed For Flat Top Solidbody Electric Guitars Such As Gibson® SG®, Gibson® Les Paul® Special, Rickenbacker® 325, And Fender® Telecaster®. Sometimes Referred To As The Bigsby® Horseshoe.
Series: Original Kalamazoo Line
Manufacturing Method: Sand Cast
Manufacturing Material: Aluminum
Approximate Weight: 287 Grams/10.1 oz.
Overall Length: 4 3/4”/120.65mm
Overall Width: 3 3/4”/95.3mm

Quantity

Price: $149.00

Loading Updating cart...
Knob Pointers Nickel for Gibson (4) [aged]

Knob Pointers Nickel for Gibson (4) [aged]

$14.00

AGED Nickel KNOB POINTERS (4) for Gibson Historic vintage 1958 1959 1960 Les Paul 335 SG.

Vintage Relic aged KNOB POINTERS, nickel plated for Gibson Les Paul 335 SG Standard Historic Custom Shop 1959 1958 1960 Burst. These are brand new, recently aged distressed relic'd by us for a 1950s 1960s vintage look.

Pictures show a "medium" relic; if you prefer "light" or "heavy" please select below.

Quantity

Price: $14.00

Loading Updating cart...
ABR-1 Bridge Vintage Spec for Gibson [aged]

ABR-1 Bridge Vintage Spec for Gibson [aged]

$59.00

Vintage Relic aged ABR-1 No Wire Non-wire Tune-O-Matic Bridge; nickel; for Gibson Les Paul ES-335 SG Standard Historic Custom Shop 1959 1958 1960 Burst 1956 1957 Goldtop.

Includes bridge, vintage correct THIN thumbwheels, and posts. Saddles are brass. Standard 2.875" post spacing. 12" radius. These are brand new, recently aged distressed relic'd by us for a 1950s 1960s vintage look. These are great bridges on par with Gibson Historic spec. Very lightweight, too!

Pictures show a "medium" relic; if you prefer "light" or "heavy" please select below.

Quantity

Price: $59.00

Loading Updating cart...
Knurled Deep Nut Gold [new]

Knurled Deep Nut Gold [new]

$12.00

Knurled Deep Nut for Switchcraft USA toggle switch, vintage Gibson style. Gold. Outer dimension 5/8", inside dimension 7/16", collar 1/8", 15/32-32 thread.

Quantity

Price: $12.00

Loading Updating cart...
Grover Tuners 102NV Milk Bottle Nickel Aged

Grover Tuners 102NV Milk Bottle Nickel Aged

$75.00

Vintage Relic aged Grover Rotomatic Tuners tuning pegs fits / compatible with guitars with 10mm headstock tuner holes such as some Gibson Les Paul 335 SG Standard Historic Custom Shop. Also used on Martin and other acoustic guitars.  If you have a Gibson Historic or other guitar with vintage spec Klusons (8.8mm post hole), you will have to increase the post size to 10mm (we suggest a simple hand reamer tool).

Model 102NV "Milk Bottle", 3 per side (3L, 3R), nickel, 18:1 gear ratio. Includes 6 tuners, 6 bushings, 6 washers and 6 mounting screws in original packaging. These are brand new, recently aged distressed relic'd by us for a 1950s 1960s vintage look.

The original Rotomatic look, with distinctive "milk bottle" profile on the worm gear housing. For 3-left/3-right solid pegheads.

A great solution for restoring '60s and '70s guitars to their original appearance. All Grover Rotomatics feature adjustable knob tension, cast housings and sealed lubrication.

  • 18:1 gear ratio
  • Removable knobs
  • 10mm (13/32") diameter pegholes required

Sets of 6 (3-left/3-right) with threaded hex bushings, washers and mounting screws.

Quantity

Price: $75.00

Loading Updating cart...
Truss Rod Tool for Gibson [new]

Truss Rod Tool for Gibson [new]

$10.00

Truss rod adjustment tool for Gibson guitars with 5/16" hex nut. Use to adjust the neck relief on your Les Paul, ES-335, SG, Junior, etc.

Quantity

Price: $10.00

Loading Updating cart...
Kluson Tuners (1950-1955) No Line [aged]

Kluson Tuners (1950-1955) No Line [aged]

$66.00

Aged Kluson Tuners for Fender.  6 individual in line, nickel, no line (1950-1955), split post (safety post) vintage style tuning machine. Kluson model #SD9105MNNL. Includes 6 tuners, 6 bushings, and 7 mounting screws. Great replacement tuners for your vintage or Custom Shop Stratocaster, Telecaster, Nocaster, Esquire, Broadcaster; just like the originals but with improved 15:1 tuning ratio.

Bushing dimensions: 8.8mm (outside), 1/4" (inside). Other dimensions: total center to center distance of all 3 posts - 2 3/4", center to center distance between posts - 1 3/8 ", length of baseplate- 4 1/4", post height - 1", drilled post, single hole, post dia. 6.3 mm (1/4").

Historically used on: 1950-1951 Fender Broadcaster, 1951 Fender Nocaster, 1952-1955 Fender Telecaster, 1950-1955 Fender Esquire, 1954-1955 Fender Stratocaster.

Quantity

Price: $66.00

Strap Buttons (pair) for Fender [aged]

Strap Buttons (pair) for Fender [aged]

$12.00

Aged Strap Buttons (pair) for Fender Stratocaster, Telecaster, PBass, JBass, Nocaster, Esquire, Jaguar, Jazzmaster. 2 buttons with mounting screws.

Quantity

Price: $12.00

Loading Updating cart...
Strap Buttons / Screws (pair) for Fender [new]

Strap Buttons / Screws (pair) for Fender [new]

$9.00

Strap Buttons (pair) for Fender Stratocaster, Telecaster, Nocaster, Esquire, Jaguar, Jazzmaster, etc. 2 buttons with mounting screws. New.

Quantity

Price: $9.00

Loading Updating cart...
4-hole Neck Plate for Fender [aged]

4-hole Neck Plate for Fender [aged]

$18.00

Aged 4-hole Neck Plate & Screws for Fender Stratocaster, Telecaster, PBass, JBass, Nocaster, Esquire, Jaguar, Jazzmaster. Fits USA and MIM Fenders (2.5" x 2.0" x 5/64").

Quantity

Price: $18.00

Loading Updating cart...
4-hole Neck Plate / Screws for Fender [new]

4-hole Neck Plate / Screws for Fender [new]

$14.00

4-hole Neck Plate & Screws for Fender Stratocaster, Telecaster, PBass, JBass, Nocaster, Esquire, Jaguar, Jazzmaster. Fits USA and MIM Fenders (2.5" x 2.0" x 5/64"). New.

Quantity

Price: $14.00

Loading Updating cart...
Telecaster Control Plate for Fender [aged]

Telecaster Control Plate for Fender [aged]

$25.00

Aged Telecaster Control Plate & Screws for Fender Telecaster, Nocaster, Esquire. Fits USA and MIM Fenders (see specs below).

Pot Hole Diameter = 25/64"
Pot hole ctr to ctr = 2 11/32"
Switch mounting hole ctr to ctr = 1 5/8"
Mounting hole ctr to ctr = 5 59/64"
Blade slot length = 1 5/64"
Plate length = 6 5/16"
Plate width = 1 17/64"
Plate thickness = 3/32"

Quantity

Price: $25.00

Loading Updating cart...
Fender Strat ’57 Control Shield [new]

Fender Strat ’57 Control Shield [new]

$10.00

New genuine Fender aluminum pickguard shield. Original equipment on early Strats. Predrilled to fit between the pickguard and body to eliminate hum and noise. Fender P.N. 001-9640-000.

Quantity

Price: $10.00

Loading Updating cart...
Domed Knobs (’50s) for Fender Tele Nocaster [aged]

Domed Knobs (’50s) for Fender Tele Nocaster [aged]

$29.00

Aged '50s style (dome top) Tele or PBass knobs. Fit 1/4' solid shaft pot (standard CTS/Fender). Nickel plating.

Quantity

Price: $29.00

Loading Updating cart...
Humbucker Mounting Screws [new]

Humbucker Mounting Screws [new]

$8.00

New Pickup Mounting Screws (4) nickel slot head vintage style for Gibson PAF style humbuckers. Springs included.  Size: 3-48 thread , 1.25" long. Will fit US thread (not metric thread) humbucker pickups  such as Gibson, Throbak, Fralin, Sheptone, Wolfetone, Lollar, Bare Knuckles, Duncan, etc.

Quantity

Price: $8.00

Loading Updating cart...
Knurled Deep Nut [aged]

Knurled Deep Nut [aged]

$12.00

Aged Knurled Deep Nut for Switchcraft USA toggle switch, vintage Gibson style. Outer dimension 5/8", inside dimension 7/16", collar 1/8", 15/32-32 thread.

Quantity

Price: $12.00

Loading Updating cart...
Kluson Tuners (1960-1964) 3L3R [aged]

Kluson Tuners (1960-1964) 3L3R [aged]

$66.00

Aged Kluson Tuners (3L3R) for Gibson. Single Line, Double Ring, Nickel with pearl colored plastic buttons. Kluson model #SD90SLNDRSL. Includes 6 tuners, 6 bushings, and 12 mounting screws. Great replacement for your vintage tuners or your Historic Les Paul orES-335; just like the originals but with improved 15:1 tuning ratio. Bushing dimensions: 8.8mm (outside), 1/4" (inside).

Historically used on: 1960-1964 Gibson ES-175, 1960 Gibson Les Paul Standard, 1960-1963 Gibson Les Paul /SG Standard, 1959 Epiphone Crestwood Custom, 1959 Epiphone Broadway, 1960-1964 Gibson ES-335, 1960-1964 Gibson EDS-1275 Double 12/6 double neck (3 sets needed), 1958-1959 Gibson EMS-1235 Double Mandolin 6 string guitar/mandolin double neck (2 sets needed), 1959 Gibson EB-6, 1956-1959 Gibson J-160E, 1952-1959 Gibson J-185

Quantity

Price: $66.00

Kluson Tuners (1956-1964) 3/Plate [aged]

Kluson Tuners (1956-1964) 3/Plate [aged]

$66.00

Aged Kluson Tuners (3L3R on plate) for Gibson.  Nickel with white colored plastic buttons. Kluson model #WD90NPP. Includes 6 tuners, 6 bushings, and 12 mounting screws. Great replacement tuners for your vintage or Historic Les Paul Jr, Special, Melody Maker, J45, etc; just like the originals but with improved 15:1 tuning ratio.

Bushing dimensions: 8.8mm (outside), 1/4" (inside). Other dimensions: total center to center distance of all 3 posts - 2 3/4", center to center distance between posts - 1 3/8", length of baseplate- 4 1/4", post height - 1", drilled post, single hole, post dia. 6.3 mm (1/4").

Historically used on: 1956-1964 Kay Guitars (countless models), 1956-1964 Gibson LG-1, LG-2 & LG-3, 1956-1964 Gibson J-45, 1956-1964 Gibson J-50, 1956-1959 Gibson CF-100E, 1956-1964 Gibson ES-125, 1956-1964 Gibson ES-140, 1956 Gibson ES-150, 1956-1961 Gibson Les Paul Junior, 1961-1963 Gibson Les Paul Junior / SG Junior, 1963-1964 Gibson SG Junior, 1956-1959 Gibson Les Paul Special , 1960-1961 Gibson Les Paul / SG Special, 1960-1964 Gibson SG Special, 1959-1964 Gibson Melody Maker, 1962-1964 Gibson B-25, 1958 Gibson LG-0, 1958-1964 Epiphone Cortez, 1958-1964 Epiphone Century, 1958-1963 Epiphone Wilshire, 1958-1963 Epiphone Coronet, 1958-1964 Epiphone Texan.

Quantity

Price: $66.00

Kluson Tuners (1956-1959) 3L3R [aged]

Kluson Tuners (1956-1959) 3L3R [aged]

$66.00

Aged Kluson Tuners (3L3R) for Gibson. Single Line, Single Row, Nickel with pearl colored plastic buttons. Kluson model #SD90SLN. Includes 6 tuners, 6 bushings, and 12 mounting screws. Great replacement for your vintage tuners or your Historic Les Paul or ES-335; just like the originals but with improved 15:1 tuning ratio. Bushing dimensions: 8.8mm (outside), 1/4" (inside).

Historically used on: 1956-1959 Gibson ES-175, 1956-1959 Gibson Les Paul Standard, 1959 Epiphone Crestwood Custom, 1959 Epiphone Broadway, 1958-1959 Gibson ES-335, 1958-1959 Gibson EDS-1275 Double 12/6 double neck (3 sets needed), 1958-1959 Gibson EMS-1235 Double Mandolin 6 string guitar/mandolin double neck (2 sets needed), 1959 Gibson EB-6, 1956-1959 Gibson J-160E, 1952-1959 Gibson J-185

Quantity

Price: $66.00

Loading Updating cart...
Humbucker Polepiece Screws [aged]

Humbucker Polepiece Screws [aged]

$14.00

Aged nickel humbucker polepiece fillister head screws for Gibson PAF style pickups. Full set of 12 (twelve) for a pair of pickups. Size: 5-40 thread x 3/4" (will fit Gibson humbuckers and most vintage style humbucker pickups like Throbak, Fralin, Sheptone, Wolfetone, Lollar, Bare Knuckles, Duncan, etc.).

Quantity

Price: $14.00

Loading Updating cart...
Humbucker Mounting Screws [aged]

Humbucker Mounting Screws [aged]

$9.00

Aged Pickup Mounting Screws (4) nickel slot head vintage style for Gibson PAF style humbuckers. Springs included.  Size: 3-48 thread , 1.25" long. Will fit US thread (not metric thread) humbucker pickups  such as Gibson, Throbak, Fralin, Sheptone, Wolfetone, Lollar, Bare Knuckles, Duncan, etc.

Quantity

Price: $9.00

Loading Updating cart...
Grover Tuners #102-18N [aged]

Grover Tuners #102-18N [aged]

$74.00

Aged Grover Rotomatic Nickel Tuners (3L3R) for Gibson, Martin guitars (model 102-18N). Includes washers, bushings and wood screws.

The original Rotomatic with an improved higher ratio gearing. The 18:1 ratio provides for finer tuning and greater stability. The finer gears provide smoother tuning and a higher degree of backlash elimination. This new version of the Rotomatic uses the exact housing as the original; only the gearing has changed. Requires hole size of .391" (~25/64).

Quantity

Price: $74.00

Loading Updating cart...
Bigsby B7 USA Tailpiece [aged]

Bigsby B7 USA Tailpiece [aged]

$199.00

Aged Bigsby B7 USA Vibrato Tailpiece for Gibson Les Paul, ES-335, and other guitars with arched tops. Includes all mounting hardware, instructions, and original box.

Model Name: B-7; Series: Original Kalamazoo Line; Manufacturing Method: Sand Cast; Manufacturing Material: Aluminum; Approximate weight: 354 grams/12.5 oz.; Overall Length: 8 3/4”/222.3 mm; Overall Width: 3 5/8”/92.1 mm; Arm adjusts with 1/8” Allen wrench and 5/16” socket wrench.

Quantity

Price: $199.00

Bigsby B3 USA Tailpiece [aged]

Bigsby B3 USA Tailpiece [aged]

$179.00

Aged Bigsby B3 USA Vibrato Tailpiece for Thin Hollowbody And Semihollowbody Electric Guitars Such As Gibson  ES-330, Gibson ES-125, Gibson ES-225, Epiphone Casino, Gretsch Duo Jet.  Includes all mounting hardware, instructions, and original box.

Model Name: B-3; Series: Original Kalamazoo Line; Manufacturing Method: Sand Cast; Manufacturing Material: Aluminum; Approximate weight: 296 grams/10.4 oz.; Overall Length: 7 5/8”/193.7 mm; Overall Width: 3 5/8”/92.1 mm; Arm adjusts with 1/8” Allen wrench and 5/16” socket wrench.

Quantity

Price: $179.00

LoadingUpdating...