Parts
Strap Buttons (pair) for Fender Stratocaster, Telecaster, Nocaster, Esquire, Jaguar, Jazzmaster, etc. 2 buttons with mounting screws. New.
Vintage Relic aged ABR-1 No Wire Non-wire Tune-O-Matic Bridge; nickel; for Gibson Les Paul ES-335 SG Standard Historic Custom Shop 1959 1958 1960 Burst 1956 1957 Goldtop.
Includes bridge, vintage correct THIN thumbwheels, and posts. Saddles are brass. Standard 2.875" post spacing. 12" radius. These are brand new, recently aged distressed relic'd by us for a 1950s 1960s vintage look. These are great bridges on par with Gibson Historic spec. Very lightweight, too!
Pictures show a "medium" relic; if you prefer "light" or "heavy" please select below.
Aged '50s style (dome top) Tele or PBass knobs. Fit 1/4' solid shaft pot (standard CTS/Fender). Nickel plating.
New Pickup Mounting Screws (4) nickel slot head vintage style for Gibson PAF style humbuckers. Springs included. Size: 3-48 thread , 1.25" long. Will fit US thread (not metric thread) humbucker pickups such as Gibson, Throbak, Fralin, Sheptone, Wolfetone, Lollar, Bare Knuckles, Duncan, etc.
AGED Nickel fits Gibson Historic vintage 1958 1959 1960 Les Paul 335 SG guitars.
Vintage Relic aged tailpiece STUDS (brass, nickel plated) & BUSHINGS, compatible with Gibson Les Paul 335 SG Standard HistoricCustom Shop 1959 1958 1960 Burst. These are brand new, recently aged distressed relic'd by us for a 1950s 1960s vintage look.
Vintage / historic spec (will fit vintage and USA Historic Spec tailpieces with ears measuring 5/16" or less). Bushing dimensions: .875" x .50". Studs are 1.425" total length (threaded portion is .875") with 5/16-24 thread. Made in USA.
NOTE: pictures show a typical "medium" relic; if you prefer "light" or "heavy" please choose below. Pictures are similar (but not exact) to the level of aging your studs will receive; these are custom relic'd by hand one at a time and, like real vintage parts, may vary slightly.
New nickel humbucker polepiece fillister head screws for Gibson PAF style pickups. Full set of 12 (twelve) for a pair of pickups. Size: 5-40 thread x 3/4" (will fit Gibson humbuckers and most vintage style humbucker pickups like Throbak, Fralin, Sheptone, Wolfetone, Lollar, Bare Knuckles, Duncan, etc.).
Aged Pickup Mounting Screws (4) nickel slot head vintage style for Gibson PAF style humbuckers. Springs included. Size: 3-48 thread , 1.25" long. Will fit US thread (not metric thread) humbucker pickups such as Gibson, Throbak, Fralin, Sheptone, Wolfetone, Lollar, Bare Knuckles, Duncan, etc.
Vintage Relic aged Grover Rotomatic Tuners tuning pegs fits / compatible with guitars with 10mm headstock tuner holes such as some Gibson Les Paul 335 SG Standard Historic Custom Shop. Also used on Martin and other acoustic guitars. If you have a Gibson Historic or other guitar with vintage spec Klusons (8.8mm post hole), you will have to increase the post size to 10mm (we suggest a simple hand reamer tool).
Model 102NV "Milk Bottle", 3 per side (3L, 3R), nickel, 18:1 gear ratio. Includes 6 tuners, 6 bushings, 6 washers and 6 mounting screws in original packaging. These are brand new, recently aged distressed relic'd by us for a 1950s 1960s vintage look.
The original Rotomatic look, with distinctive "milk bottle" profile on the worm gear housing. For 3-left/3-right solid pegheads.
A great solution for restoring '60s and '70s guitars to their original appearance. All Grover Rotomatics feature adjustable knob tension, cast housings and sealed lubrication.
- 18:1 gear ratio
- Removable knobs
- 10mm (13/32") diameter pegholes required
Sets of 6 (3-left/3-right) with threaded hex bushings, washers and mounting screws.
Aged flat tops (1960s style) knobs for Fender Telecaster, PBass, Esquire. Fit 1/4" solid shaft pots. 0.75" tall, 0.75" diameter.
Aged Telecaster Control Plate & Screws for Fender Telecaster, Nocaster, Esquire. Fits USA and MIM Fenders (see specs below).
Pot Hole Diameter = 25/64"
Pot hole ctr to ctr = 2 11/32"
Switch mounting hole ctr to ctr = 1 5/8"
Mounting hole ctr to ctr = 5 59/64"
Blade slot length = 1 5/64"
Plate length = 6 5/16"
Plate width = 1 17/64"
Plate thickness = 3/32"
New genuine Fender aluminum pickguard shield. Original equipment on early Strats. Predrilled to fit between the pickguard and body to eliminate hum and noise. Fender P.N. 001-9640-000.
Vintage Relic aged stop TAILPIECE. Lightweight (only 1.2 oz) aluminum, nickel plated for Gibson Les Paul 335 SG Standard Historic Custom Shop 1959 1958 1960 Burst. These are brand new, recently aged distressed relic'd by us for a 1950s 1960s vintage look. Vintage / historic spec (will fit vintage and USA made Gibson guitars). Made in USA.
Pictures show a "medium" relic; you may select "light" or "heavy."
Aged 4-hole Neck Plate & Screws for Fender Stratocaster, Telecaster, PBass, JBass, Nocaster, Esquire, Jaguar, Jazzmaster. Fits USA and MIM Fenders (2.5" x 2.0" x 5/64").
Aged Strap Buttons (pair) for Fender Stratocaster, Telecaster, PBass, JBass, Nocaster, Esquire, Jaguar, Jazzmaster. 2 buttons with mounting screws.
4-hole Neck Plate & Screws for Fender Stratocaster, Telecaster, PBass, JBass, Nocaster, Esquire, Jaguar, Jazzmaster. Fits USA and MIM Fenders (2.5" x 2.0" x 5/64"). New.
Aged Knurled Deep Nut for Switchcraft USA toggle switch, vintage Gibson style. Outer dimension 5/8", inside dimension 7/16", collar 1/8", 15/32-32 thread.
Humbucker covers for vintage Gibson PAF style pickups. Nickel (pair). Aged.
Polepice spacing is vintage spec 1-15/16" (49.2 mm)--both neck and bridge. Will fit many Gibson humbuckers and most vintage style humbucker pickups like Seymour Duncan, Throbak, Sheptone, Fralin, Wolfetone, Bare Knuckles, Wizz, Lollar, etc. Measure your polepiece spacing or check with manufacturer for your exact model!
NOTE: LIGHT relic is uniform aging (no string ghost lines); MEDIUM relic is similar to stock photo (string ghost lines); HEAVY has less shine to nickel (string ghost lines). Send a message for a custom order.
Aged Kluson Tuners (3L3R) for Gibson. Single Line, Double Ring, Nickel with pearl colored plastic buttons. Kluson model #SD90SLNDRSL. Includes 6 tuners, 6 bushings, and 12 mounting screws. Great replacement for your vintage tuners or your Historic Les Paul orES-335; just like the originals but with improved 15:1 tuning ratio. Bushing dimensions: 8.8mm (outside), 1/4" (inside).
Historically used on: 1960-1964 Gibson ES-175, 1960 Gibson Les Paul Standard, 1960-1963 Gibson Les Paul /SG Standard, 1959 Epiphone Crestwood Custom, 1959 Epiphone Broadway, 1960-1964 Gibson ES-335, 1960-1964 Gibson EDS-1275 Double 12/6 double neck (3 sets needed), 1958-1959 Gibson EMS-1235 Double Mandolin 6 string guitar/mandolin double neck (2 sets needed), 1959 Gibson EB-6, 1956-1959 Gibson J-160E, 1952-1959 Gibson J-185
AGED Nickel KNOB POINTERS (4) for Gibson Historic vintage 1958 1959 1960 Les Paul 335 SG.
Vintage Relic aged KNOB POINTERS, nickel plated for Gibson Les Paul 335 SG Standard Historic Custom Shop 1959 1958 1960 Burst. These are brand new, recently aged distressed relic'd by us for a 1950s 1960s vintage look.
Pictures show a "medium" relic; if you prefer "light" or "heavy" please select below.
Aged nickel humbucker polepiece fillister head screws for Gibson PAF style pickups. Full set of 12 (twelve) for a pair of pickups. Size: 5-40 thread x 3/4" (will fit Gibson humbuckers and most vintage style humbucker pickups like Throbak, Fralin, Sheptone, Wolfetone, Lollar, Bare Knuckles, Duncan, etc.).
Aged Bigsby B3 USA Vibrato Tailpiece for Thin Hollowbody And Semihollowbody Electric Guitars Such As Gibson ES-330, Gibson ES-125, Gibson ES-225, Epiphone Casino, Gretsch Duo Jet. Includes all mounting hardware, instructions, and original box.
Model Name: B-3; Series: Original Kalamazoo Line; Manufacturing Method: Sand Cast; Manufacturing Material: Aluminum; Approximate weight: 296 grams/10.4 oz.; Overall Length: 7 5/8”/193.7 mm; Overall Width: 3 5/8”/92.1 mm; Arm adjusts with 1/8” Allen wrench and 5/16” socket wrench.
Knurled Deep Nut for Switchcraft USA toggle switch, vintage Gibson style. Nickel. Outer dimension 5/8", inside dimension 7/16", collar 1/8", 15/32-32 thread.
Flat tops (1960s style) knobs for Fender Telecaster, PBass, Esquire. Fit 1/4" solid shaft pots. 0.75" tall, 0.75" diameter. New.
Aged Kluson Tuners (3L3R on plate) for Gibson. Nickel with white colored plastic buttons. Kluson model #KD-3P-NP. Includes 6 tuners, 6 bushings, and 12 mounting screws. Great replacement tuners for your vintage or Historic Les Paul Jr, Special, Melody Maker, J45, etc; just like the originals but with improved 15:1 tuning ratio.
Bushing dimensions: 8.8mm (outside), 1/4" (inside). Other dimensions: total center to center distance of all 3 posts - 2 3/4", center to center distance between posts - 1 3/8", length of baseplate- 4 1/4", post height - 1", drilled post, single hole, post dia. 6.3 mm (1/4").
Historically used on: 1956-1964 Kay Guitars (countless models), 1956-1964 Gibson LG-1, LG-2 & LG-3, 1956-1964 Gibson J-45, 1956-1964 Gibson J-50, 1956-1959 Gibson CF-100E, 1956-1964 Gibson ES-125, 1956-1964 Gibson ES-140, 1956 Gibson ES-150, 1956-1961 Gibson Les Paul Junior, 1961-1963 Gibson Les Paul Junior / SG Junior, 1963-1964 Gibson SG Junior, 1956-1959 Gibson Les Paul Special , 1960-1961 Gibson Les Paul / SG Special, 1960-1964 Gibson SG Special, 1959-1964 Gibson Melody Maker, 1962-1964 Gibson B-25, 1958 Gibson LG-0, 1958-1964 Epiphone Cortez, 1958-1964 Epiphone Century, 1958-1963 Epiphone Wilshire, 1958-1963 Epiphone Coronet, 1958-1964 Epiphone Texan.
Aged Bigsby B7 Vibrato Tailpiece for Gibson Les Paul, ES-335, and other guitars with arched tops. Includes all mounting hardware, instructions, and original box.
Model Name: B-7; Series: Original Kalamazoo Line; Manufacturing Method: Sand Cast; Manufacturing Material: Aluminum; Approximate weight: 354 grams/12.5 oz.; Overall Length: 8 3/4”/222.3 mm; Overall Width: 3 5/8”/92.1 mm; Arm adjusts with 1/8” Allen wrench and 5/16” socket wrench.
Truss rod adjustment tool for Gibson guitars with 5/16" hex nut. Use to adjust the neck relief on your Les Paul, ES-335, SG, Junior, etc.
Aged Kluson Tuners for Fender. 6 individual in line, nickel, single line (1956-1964), split post (safety post) vintage style tuning machine. Kluson model #KD-6B-NM. Includes 6 tuners, 6 bushings, and 7 mounting screws. Great replacement tuners for your vintage or Custom Shop Stratocaster, Telecaster, Jaguar, Jazzmaster; just like the originals but with improved 15:1 tuning ratio.
Bushing dimensions: 8.8mm (outside), 1/4" (inside). Other dimensions: total center to center distance of all 3 posts - 2 3/4", center to center distance between posts - 1 3/8", length of baseplate- 4 1/4", post height - 1", drilled post, single hole, post dia. 6.3 mm (1/4").
Historically used on: 1956-1964 Fender Telecaster, 1956-1964 Fender Stratocaster, 1958-1964 Fender Jazzmaster, 1959-1964 Fender Custom Telecaster, 1962-1964 Fender Fender Bass IV (6 string bass), 1962-1964 Fender Jaguar.
Knurled Deep Nut for Switchcraft USA toggle switch, vintage Gibson style. Gold. Outer dimension 5/8", inside dimension 7/16", collar 1/8", 15/32-32 thread.
Aged Kluson Tuners for Fender. 6 individual in line, nickel, no line (1950-1955), split post (safety post) vintage style tuning machine. Kluson model #SD9105MNNL. Includes 6 tuners, 6 bushings, and 7 mounting screws. Great replacement tuners for your vintage or Custom Shop Stratocaster, Telecaster, Nocaster, Esquire, Broadcaster; just like the originals but with improved 15:1 tuning ratio.
Bushing dimensions: 8.8mm (outside), 1/4" (inside). Other dimensions: total center to center distance of all 3 posts - 2 3/4", center to center distance between posts - 1 3/8 ", length of baseplate- 4 1/4", post height - 1", drilled post, single hole, post dia. 6.3 mm (1/4").
Historically used on: 1950-1951 Fender Broadcaster, 1951 Fender Nocaster, 1952-1955 Fender Telecaster, 1950-1955 Fender Esquire, 1954-1955 Fender Stratocaster.
NOTE: this is a special order item and ships in about 10 days from purchase.
Vintage Relic aged Gibson Historic Spec Non-wire Tune-O-Matic ABR-1 nickel bridge for Gibson Les Paul 335 SG Standard Historic Custom Shop 1959 1958 1960 Burst. Model PBBR-059. Includes bridge, thumbwheels, posts. These are brand new, recently aged distressed relic'd by us for a 1950s 1960s vintage look.
Pictures show a "medium" relic; you may select "light" or "heavy."
Replicates the original down to every last detail! Straight from Gibson Guitar's Historic Re-issue guitars come Gibson's new Historic Spec series—parts that have been specially designed to replicate the original parts used by Gibson in the late 1950s. With this Historic Non-Wire ABR-1 Bridge, Gibson has re-created the famous non-wire bridge it used on its electric guitars until 1962-63. 'GIBSON ABR-1' is featured in raised letters on the base of the bridge. The vintage bridge also includes un-notched saddles, in order to fully emulate the classic parts. The Non-Wire ABR-1 Bridge comes with the full assembly.
Domed (1950s style) knobs for Fender Telecaster, Nocaster, Broadcaster, Esquire. Fit 1/4" solid shaft pots. 0.73" tall, 0.75" diameter. New. Fender P.N. 099-2056-000.
Aged Grover Rotomatic Nickel Tuners (3L3R) for Gibson, Martin guitars (model 102-18N). Includes washers, bushings and wood screws.
The original Rotomatic with an improved higher ratio gearing. The 18:1 ratio provides for finer tuning and greater stability. The finer gears provide smoother tuning and a higher degree of backlash elimination. This new version of the Rotomatic uses the exact housing as the original; only the gearing has changed. Requires hole size of .391" (~25/64).
Aged Kluson Tuners (3L3R) for Gibson. Single Line, Single Row, Nickel with pearl colored plastic buttons. Kluson model #KD-3-NPK. Includes 6 tuners, 6 bushings, and 12 mounting screws. Great replacement for your vintage tuners or your Historic Les Paul or ES-335; just like the originals but with improved 15:1 tuning ratio. Bushing dimensions: 8.8mm (outside), 1/4" (inside).
Historically used on: 1956-1959 Gibson ES-175, 1956-1959 Gibson Les Paul Standard, 1959 Epiphone Crestwood Custom, 1959 Epiphone Broadway, 1958-1959 Gibson ES-335, 1958-1959 Gibson EDS-1275 Double 12/6 double neck (3 sets needed), 1958-1959 Gibson EMS-1235 Double Mandolin 6 string guitar/mandolin double neck (2 sets needed), 1959 Gibson EB-6, 1956-1959 Gibson J-160E, 1952-1959 Gibson J-185
Aged RELIC Bigsby B5 aluminum/nickel vibrato tailpiece. New, recentlyaged for a 1950s 1960s 1970s vintage look. Perfect for your Gibson SG Les Paul Special vintage or Historic Custom Shop or Fender Telecaster. Includes all mounting hardware, instructions, original box.
Photos show typical "medium" relic; you may select "light" or "heavy" below.
Designed For Flat Top Solidbody Electric Guitars Such As Gibson® SG®, Gibson® Les Paul® Special, Rickenbacker® 325, And Fender® Telecaster®. Sometimes Referred To As The Bigsby® Horseshoe.
Bigsby B5 Vibrato Kit. P/N 0868013003.
Series: Original Kalamazoo Line
Manufacturing Method: Sand Cast
Manufacturing Material: Aluminum
Approximate Weight: 287 Grams/10.1 oz.
Overall Length: 4 3/4”/120.65mm
Overall Width: 3 3/4”/95.3mm